B. Ali, M. Karimzadehkhouei, M.N. Esfahani, Y. Leblebici, and B.E. Alaca,
“Selective Surface Metallization of Single Crystal Silicon Nanowires via Stencil Lithography”,
Proceedings of 2023 IEEE Nanotechnology Materials and Devices Conference (NMDC),
(Paestum (Salerno), Italy, Oct. 22-25, 2023), pp. 681-686.
B. Ali, M. Karimzadehkhouei, M. N. Esfahani, Y. Leblebici, and B. E. Alaca,
“Shadow Masking for Nanoscale Patterning of Miniaturized Sensors”,
Proceedings of MARSS – International Conference on Manipulation, Automation and Robotics at Small Scales,
(Abu Dhabi, UAE, Oct. 09-13, 2023).
S. Zare Pakzad, B. Ali, S. B. Coban, M. Karimzadehkhouei, and B. E. Alaca,
“Innovative MEMS Stage for Automated Micromechanical Testing”,
Proceedings of MARSS – International Conference on Manipulation, Automation and Robotics at Small Scales,
(Abu Dhabi, UAE, Oct. 09-13, 2023).
B. Pruchnik, K. Kwoka, T. Piasecki, M. Jedari Ghourichaei, M. Karimzadehkhouei, C. Aydogan, I. W. Rangelow, H. Bayraktar, B. E. Alaca, and T. Gotszalk,
“Characterization of Hybrid Nanowire-MEMS Force Sensors Using Direct Actuation”,
49th International Conference on Micro and Nano Engineering,
(Berlin, Germany, September 25-28, 2023), pp. 683-684.
M. Karimzadehkhouei, M. Jedari Ghourichaei, L. Demirkazik, B. Pruchnik, K. Kwoka, D. Badura, T. Piasecki, O. Aydin, B. Aksoy, C. Aydogan, G. Nadar, I. W. Rangelow, A. D. Yalcinkaya, H. Bayraktar, T. Gotszalk, and B. E. Alaca,
“A Hybrid Nanowire-MEMS Force Sensor”,
49th International Conference on Micro and Nano Engineering,
(Berlin, Germany, September 25-28, 2023), pp. 738-739.
S. Zare Pakzad, M. Karimzadehkhouei, and B. E. Alaca,
“Low-Temperature Monolithic Fabrication of Silicon Nanowires with Reduced Process Complexity”,
48th International Conference on Micro and Nano Engineering- Eurosensors,
(Leuven, Belgium, September 19-23, 2022).
B. Ali, M. Karimzadehkhouei, M. Nasr Esfahani, Y. Leblebici, and B. E. Alaca,
“Stencil Lithography for Bridging MEMS and NEMS”,
48th International Conference on Micro and Nano Engineering- Eurosensors,
(Leuven, Belgium, September 19-23, 2022).
S. Zare Pakzad, M. Nasr Esfahani, and B. Erdem Alaca,
“Molecular Dynamics Study of Orientation-dependent Tensile Properties of Si Nanowires with Native Oxide: Surface Stress and Surface Energy Effects”,
Proceedings of the 21st International Conference on Nanotechnology (IEEE Nano 2021),
(online, July 28-30, 2021), pp. 370–373.
S. Zare Pakzad, M. Nasr Esfahani, Z. Tasdemir, N. Wollschläger, L. XueFei, T. Li, M. Yilmaz, Y. Leblebici, and B. Erdem Alaca,
“Studying the Surface and Residual Stress Effects in the Bending Response of Silicon Nanowires: Testing and Modeling”,
2021 Virtual MRS Spring Meeting
(online, April 17-23, 2021).
M. Ozden, S. Shahbeigi, M. Hofmann, S. Zare Pakzad, M. Karimzadehkhouei, M. Nasr Esfahani, M. Holz, I. W. Rangelow, A. D. Yalcinkaya, and B. E. Alaca,
“Field-Emission Scanning Probe Lithography-based Mix-and-Match Fabrication of Si Nanowires on SOI Substrates”,
64th International Conference on Electron, Ion, and Photon Beam Technology and Nanofabrication (EIPBN 2021),
(online, June 1-4, 2021).
S. Shahbeigi, M. Nasr Esfahani, and B. E. Alaca,
“Electromechanical Modeling of Silicon Nanowire Switches: Size and Boundary Condition Effects”,
International Conference of Numerical Analysis and Applied Mathematics ICNAAM 2019,
(Rhodes, Greece, September 23-28, 2019), AIP Conf. Proc., vol. 2293, 420097 (2020).
S. G. Yazgi, T. Ivanov, M. Holz, B. E. Alaca, and I. W. Rangelow,
“Investigation of Line Edge Roughness in Field-Emission Scanning Probe Lithography”,
63rd International Conference on Electron, Ion, and Photon Beam Technology and Nanofabrication,
(Minneapolis, Minnesota, May 28-31, 2019).
M. Bicer, M. Nasr Esfahani, C. Aydogan, M. Hofmann, I. W. Rangelow, A, D. Yalcinkaya, and B. E. Alaca,
“Fabrication of a silicon nanocantilever through field‐emission scanning probe lithography”,
44th International Conference on Micro and Nano Engineering,
(Copenhagen, Denmark, September 24-27, 2018).
C. Aydogan, M. Hofmann, C. Lenk, B. Volland, I. W. Rangelow, M. Bicer, B. E. Alaca, O. Ates, H. Torun, and A. D. Yalcinkaya,
“Fabrication of optical nanodevices through field-emission scanning probe lithography and cryogenic etching”,
Proceedings, SPIE Advanced Lithography-Emerging Patterning Technologies 2018,
(San Jose, California, United States, February 25 – March 01, 2018), vol. 10584, 105841G.
I. W. Rangelow, C. Lenk, M. Hofmann, S. Lenk, T. Ivanov, A. Ahmad, M. Kaestner, E. Guliyev, C. Reuter, M. Budden, J.-P. Zöllner, M. Holz, A. Reum, Z. Durrani, M. Jones, C. Aydogan, M. Bicer, B. E. Alaca, M. Kuehnel, T. Fröhlich, R. Fuessl, and E. Manske,
“Field-Emission Scanning Probe Lithography with self-actuating and self-sensing cantilevers for devices with single digit nanometer dimensions”,
Proceedings, SPIE Advanced Lithography- Emerging Patterning Technologies 2018,
(San Jose, California, United States, February 25 – March 01, 2018), vol. 10584, 1058406.
S. K. Baloch, A. Kiraz, A. Jonas, B. E. Alaca, and C. Erkey,
“Measurement of composition of mixtures at high pressures with high sensitivity using frequency response of microcantilevers”,
Proceedings, SPIE Photonics West BIOS 2018-Microfluidics, BioMEMS, and Medical Microsystems XVI,
(San Francisco, California, United States, January 27 – February 1, 2018), vol. 10491, 104910T.
I. W. Rangelow, C. Lenk, M. Hofmann, T. Ivanov, S. Lenk, E. Guliyev, M. Kaestner, C. Aydogan, M. Bicer, B. E. Alaca, O. Ates, H. Torun, A. D. Yalcinkaya, A. Ahmad, A. Reum, and M. Holz,
“Single nano-digit and closed-loop scanning probe lithography for manufacturing of electronic and optical nanodevices”,
Proceedings, SPIE NanoPhotonics Australasia 2017,
(Melbourne, Australia, December 10-13, 2017), vol. 10456, 1045621-1 – 1045621-10.
N. Wollschlaeger, A. Kranzmann, M. Yilmaz, Z. Tasdemir, and B. E. Alaca,
“Determination of mechanical properties of different sized silicon and silica nanowires tested in SEM”,
Proceedings Nanomechanical Testing in Materials Research and Development VI,
(Dubrovnik, Croatia, October 1-6, 2017), Karsten Durst, Technical University of Darmstadt, Germany Eds, ECI Symposium Series.
M. Bicer, A. D. Yalcinkaya, and B. E. Alaca,
“Magnetomotive and Tension-Based Tuning of a Micromechanical Resonator”,
in Proceedings of Eurosensors 2017,
(Paris, France, September 3-6, 2017), vol. 1(4), 572.
M. Yilmaz, N. Wollschlaeger, Z. Tasdemir, A. Kranzmann, Y. Leblebici, and B. E. Alaca,
“Finite Element Modeling for Twist-Bend Buckling of Si Nanowire Structures”,
in Book of Abstracts, 5th Conference on Nano- and Micromechanics (CNM 2017),
(Wroclaw, Poland, July 4-6, 2017), p. 10.
M. Hofmann, C. Aydogan, B. E. Volland, M. Kaestner, C. Lenk, B. E. Alaca, M. Holz, E. Manske, and I. W. Rangelow,
“Selective Pattern Transfer of Nano-Scale Features Generated by FE-SPL in 10 nm Resist”,
in Book of Abstracts, 5th Conference on Nano- and Micromechanics (CNM 2017),
(Wroclaw, Poland, July 4-6, 2017), p. 31.
M. Nasr Esfahani, Y. Leblebici, and B. E. Alaca,
“Piezoresistivity Characterization of Silicon Nanowires Through Monolithic MEMS”,
in Proceedings of the 12th IEEE International Conference on Nano/Micro Engineered and Molecular Systems (IEEE NEMS),
(Los Angeles, U.S.A., April 9-12, 2017), pp. 77-80.
H. Bayraktar, O. Aydin, B. Aksoy, O.B. Akalin, and B. E. Alaca,
“Temporally and spatially resolved local strain tracking microscopy”,
in Proceedings of the European Microscopy Congress 2016,
(Lyon, France, August 28-September 02, 2016), pp. 467-468.
A. Kiraz, M. Eryurek, Z. Tasdemir, Y. Karadag, S. Anand, N. Kilinc, and B. E. Alaca,
“Optical Sensor for Humidity and Hydrogen Gas Based on Polymer Microresonators”,
in Proceedings of the Progress in Electromagnetic Research Symposium (PIERS),
(Shanghai, China, August 8-11, 2016), pp. 2617-2617.
S. K. Baloch, G. Eris, A. Asikoglu Bozkurt, A. Jonas, A. Kiraz, B. E. Alaca, and C. Erkey,
“Determination of Composition of Ethanol-CO2 Mixtures at High Pressures Using Frequency Response of Microcantilevers”,
in Proceedings of the 15th European Meeting on Supercritical Fluids (EMSF 16),
(Essen, Germany, May 8-11, 2016).
Z. Tasdemir, O. Peric, G. Nadar, G. Fantner, Y. Leblebici, and B. E. Alaca,
“AFM-based Nanomechanical Characterization of Top-down Single Suspended Silicon Nanowires”,
in Proceedings of the 2015 MRS Fall Meeting & Exhibit,
(Boston, MA, U.S.A., November 29-December 4, 2015).
Z. Tasdemir, O. Peric, G. Nadar, G. Fantner, Y. Leblebici, and B. E. Alaca,
“AFM-based Nanomechanical Characterization of Silicon Nanowires”,
in Proceedings of the 41st International Conference on Micro and Nano Engineering,
(The Hague, The Netherlands, September 21-24, 2015).
M. N. Esfahani, M. Yilmaz, M. R. Sonne, J. H. Hattel, and B. E. Alaca,
“Effect of Geometry in Frequency Response Modeling of Nanomechanical Resonators”,
in AIP Conference Proceedings, 1st International Symposium on Theoretical, Experimental, and Computational Mechanics (TECM) (during ICNAAM 2015),
(Rhodes, Greece, September 23-29, 2015), vol: 1738, 030044.
M. N. Esfahani, M. R. Sonne, J. H. Hattel, and B. E. Alaca,
“Multiscale Coupling Based on Quasi-Continuum Method in Nanowires at Finite Temperatures”,
in Proceedings of the 15th International Conference on Nanotechnology (IEEE Nano 2015),
(Rome, Italy, July 27-30, 2015).
Z. Tasdemir, D. Sacchetto, O. Peric, G. Fantner, Y. Leblebici, and B. E. Alaca,
“Top-Down Fabrication of Silicon Nanowires in Ultra-deep Trenches”,
in Proceedings of the 40th International Conference on Micro and Nano Engineering,
(Lausanne, Switzerland, September 22-26, 2014).
G. Nadar, Z. Tasdemir, and B. E. Alaca,
“MEMS-Based Micro Tensile Testing Device”,
in Book of Abstracts, 3rd International Workshop on Physics-based Models and Experimental Verification,
(Cesme, Türkiye, June 2-4, 2014), p. 69.
G. Eris, B. E. Alaca, A. Jon, A. Kiraz, C. Erkey,
“Determination of Viscosity and Density of Supercritical Fluid Mixtures Using Frequency Response of Microcantilevers”,
in Proceedings of the 14th European Meeting on Supercritical Fluids (EMSF 14),
(Marseille, France, May 18-21, 2014).
M. N. Esfahani, M. Yilmaz, M. Bicer, and B. E. Alaca,
“Nanomechanical resonator force sensor with capacitive readout”,
Proceedings of the 11th Nanomechanical Sensing Workshop,
(Madrid, Spain, April 30-May 02, 2014), pp. 236-237.
Z. Tasdemir, D. Sacchetto, Y. Leblebici, and B. E. Alaca
“Single suspended silicon nanowire fabrication with ultra-deep trench etching”,
Proceedings of the 11th Nanomechanical Sensing Workshop,
(Madrid, Spain, April 30-May 02, 2014), pp. 184-185.
O. Cakmak, C. Elbuken, E. Ermek, S. Bulut, T. Sandner, Y. Kilinc, I.Baris, H. Kavakli, E. Alaca, and H. Urey,
“MEMS Biosensor for Blood Plasma Viscosity Measurements”,
15th European Congress on Biotechnology,
(Istanbul, Türkiye, September 23-26, 2012), 5.0.11.
H. Urey, E. Timurdogan, E. Ermek, I. H. Kavakli, and B. E. Alaca,
“MEMS biosensor for parallel and highly sensitive and specific detection of Hepatitis”,
in Proceedings of the 24th IEEE International Conference on Micro Electro Mechanical Systems (MEMS 2011),
(IEEE, Cancun, Mexico, Jan. 23-27 2011), pp. 920-923
E. Timurdogan, S. Nargul, I. H. Kavakli, E. Alaca, and H. Urey,
“Magnetic Actuated MOEMS Resonant Biosensor Array”, Optical MEMS and Nanophotonics 2010,
(Sapporo, Japan, Aug 9-12, 2010).
S. Konduri, E. Timurdogan, O. Memis, H. Kavakli, E. Alaca, and H. Urey,
“Micro-cantilever array based integrated optical system for biosensing applications”, Biosensors 2010,
(Glasgow, UK, 2010) abstract: 911, P.2.1.120.
E. Uzunlar, M. S. Kilic, B. E. Alaca, H. Urey, and C. Erkey,
“Frequency response of microcantilevers in supercritical CO2”, 12th European Meeting on Supercritical Fluids,
(Graz, Austria, May 9-12, 2010).
S. Konduri, S. Patra, E. Alaca, and H. Urey,
“Micro cantilever sensing in liquid environment with self-oscillation and amplified quality factor”,
in Proceedings of International Conference on MEMS (ICMEMS 2009),
(Chennai, India, 2009) paper: OM-O1.
N. Ozber, A. Ozturk, H. I. Ocakli, H. Urey, I. H. Kavakli, and B. Erdem Alaca,
“Functionalization of his-tagged human kappa opioid receptor on the gold surface of cantilever array”,
in Proceedings of NANA2008, IASTED International Conference on Nanotechnology and Applications,
(IAESTED, Crete, Greece, 2008) pp. 33-36
H. I. Ocakli, A. Ozturk, N. Ozber, H. Kavakli, E. Alaca, and H. Urey,
“Resonant cantilever bio sensor with integrated grating readout”,
in Proceedings of the IEEE LEOS International Conference on Optical MEMS and Nanophotonics,
(IEEE, Freiburg, Germany, 2008) pp. 46-47
M. Yilmaz, B. E. Alaca, M. Zervas, A. D. Yalcinkaya, and Y. Leblebici,
“Design and integration of a bimorph thermal microactuator with electrostatically actuated microtweezers”,
in Proceedings of the 4th Conference on PhD Research in Microelectronics and Electronics (PRIME’08),
(IEEE, Istanbul, Türkiye, 2008) pp. 125-128
O. Sardan, B. E. Alaca, A. D. Yalcinkaya, P. Bggild, P. T. Tang, and O. Hansen,
“Route to batch-compatible fabrication of nanotweezers by guided self-assembly”,
in Proceedings of the 7th IEEE International Conference on Nanotechnology,
(IEEE, Hong Kong, 2007) pp. 1231-1234
O. Sardan, A. D. Yalcinkaya, and B. E. Alaca,
“Batch fabrication of self-assembled nickel-iron nanowires by electrodeposition”,
in Proceedings of NEMS 2006, 1st IEEE International Conference on Nano/Micro Engineered and Molecular Systems,
(IEEE, Zhuhai, China, 2006) pp. 1103-1106
B. E. Alaca, T. Saif, and H. Sehitoglu,
“Self-assembled networks of nanowires”,
in Advances in Experimental Mechanics, ICEM12, 12th International Conference on Experimental Mechanics,
(EURASEM, Politecnico di Bari, Italy, 2004) pp. 348-349
B. E. Alaca, T. Saif, and H. Sehitoglu,
“Measurement of thin film fracture toughness and fatigue response”,
in Proceedings of IMECE 2004, ASME International Mechanical Engineering Congress & Exposition,
(ASME, Anaheim, California USA, 2004) IMECE2004-60314
B. E. Alaca, H. Sehitoglu, and T. Saif,
“Fabrication of directed nano wire networks through self-assembly”,
in Proceedings of MEMS 2004, 17th IEEE International Conference on Micro Electro Mechanical Systems,
(IEEE, Maastricht, The Netherlands, 2004) pp. 415-417
T. Saif, B. E. Alaca, and H. Sehitoglu,
“Nano wires by self assembly”, in Proceedings of MEMS 2003,
16th IEEE International Conference on Micro Electro Mechanical Systems,
(IEEE, Kyoto, Japan, 2003) pp. 45-47
B. E. Alaca, M. T. A. Saif, and H. Sehitoglu,
“Nano-scale film fracture with its implications in microelectromechanical systems (MEMS)”,
Anales de Mecnica de la Fractura, 19,1-12 (2002)
T. Saif, B. E. Alaca, and H. Sehitoglu,
“Self assembled nano wires”, in Proceedings of IMECE 2002,
ASME International Mechanical Engineering Congress & Exposition,
(ASME, New Orleans, Louisiana, 2002) IMECE2002-33327